Speck Model 95-X High Performance Commercial Pump

$2,480.00 – $4,830.00

Model

Clear

Earn up to 48,300 Points.

SKU N/A Categories Commercial, Commercial Pool Pumps, Speck Commercial Pumps

Speck Model 95-X High Performance Commercial Pump

Take your commercial pool to the next level with the Speck Model 95-X. Complex designs like waterfalls and negative edges require specially made pumps to function properly. Don’t shortchange your customer with multiple, smaller, louder pumps.

The Speck Model 95 comes with a largest one piece plastic casing design with integrated strainer basket, easy on/off two-piece lid, and 4″ quick disconnect unions. These features combined with our unique mechanical seal results in a medium head pump with the “highest flow” of any one piece plastic pump in the market today.

Features

Large one-piece housing design with integrated strainer basket and easy on/off two-piece lid.
Quiet and efficient medium head pump performance.
This high performance pump comes complete with our unique mechanical shaft seal that allows the pump, if mistreated, to run dry for up to one hour. The pump can be used for pool water with a salt concentration of up to 5000 ppm. (For a higher concentration please call 800-223-8538.)
Suction and discharge are equipped with 4″ quick disconnect unions for easy installation and maintenance.
Wrench for unions and lid is included with each pump.
Flanges are available upon request.
Available with a heavy duty energy efficient Totally Enclosed Fan Cooled (TEFC) or Open Drip Proof (ODP) motor designs.(Model 95-IX & Model 95-X requires a motor starter. See Add Ons Below)
- ODP Motor Design – Single Speed (single or 3 phase) or 2-speed (single phase)
- TEFC Motor Design – Single Speed (single or 3 phase)
Motor is easy to remove without disturbing the plumbing. Reusable o-rings throughout.
Compatible with our VFD line. (Direct mount option available. See Add Ons Below)
Compatible with our Automated Flow System
Every pump is performance tested before leaving the Speck factory.

Product Features

Unique Mechanical Seal – pump can run dry for up to one hour
Salt water friendly – up to 5000 ppm
Heavy-duty Totally Enclosed Fan Cooled (TEFC) Motor
This model requires a Speck Motor Starter (sold separately)
Wrench for unions and lid is included with each pump
Reusable o-rings throughout
100% recyclable plastic
Two-Year Warranty

Why choose a Speck pump?

A Speck pool pump is a smart investment that will bring you multiple benefits, including energy efficiency, quiet operation, superior performance, and durability. Speck pool pumps are built to last, with high-quality materials and superior engineering. They are designed to withstand harsh weather conditions, exposure to chemicals, and heavy usage, ensuring that you get a long-lasting and reliable pool pump that requires minimal maintenance.

Speck pool pumps are engineered with energy efficiency in mind, which means they use less power and save costs on your electricity bill. Moreover, they comply with the latest energy efficiency standards and regulations, such as DOE, which ensure that they consume less energy and produce fewer greenhouse gas emissions.

Speck pool pumps are known for their superior high flow performance, which means they can circulate more water in less time, ensuring that your pool or spa stays clean and clear. This is particularly important in commercial settings where specific flow rates are required to achieve the correct turnovers.

Make your choice with confidence and enjoy the excellence of Speck products for years to come.

Important Note: Speck pumps must be installed by a qualified technician to ensure your warranty is not voided.

Flyer-Model-95

Manual-Model-95-IX-X

Manual-Model-95-VIII

Additional information

Weight	154 lbs
Model	95-VIII 4HP Single Phase, 95 V-III 4HP Three Phase, 95-IX Single Phase, 95-IX Three Phase, 95-X 7.5HP Single Phase, 95-X Three Phase, 95-XI 10HP Three Phase