The Madimack inverELITE V2 is rated for up to 90,000 btu featuring a stepless DC Inverter allowing full control over the speed of the compressor and fan motor. The InverELITE V2 heat pump will adjust precisely and intelligently to the heat demand of your inground swimming pool to maintain stable temperature throughout the season.

Energy Savings

The InverELITE V2 heat pump runs at full speed at the beginning of the season to heat your pool faster. Once close to reaching set temperature, it will adjust to low-speed operation and maintain stable temperature throughout the season. InverELITE V2 will achieve double energy saving compared to single speed On/Off heat pumps.

Features:

Soft Start

The InverELITE V2 heat pump will start from 0 amps and increase steadily protecting electrical systems.

Operation down to 14°F (-10°C)

Built to operate in cold weather to extend your pool season into the winter.

Built-in Wifi

Built-in Wi-Fi and smart app provides convenience to control your pump on-the-go.

Smart & Quick Defrosting

InverELITE V2 is equipped with reverse cycle defrosting. It will detect frost accumulation during operation and automatically switch to defrosting mode.

Twin-rotary Compressor

Significantly reduced operating noise.

Electronic Expansion Valve

Optimized flow of refrigerant 20% higher COP.

Twisted Titanium Heat Exchanger

Increased area for heat exchange 40% higher efficiency.

Installation

Not compatible with soft sided pools, installation by licensed technician is required.

Ultra Quiet Solution

Thanks to Madimack’s Sound Shield Technology, the sound level of InverELITE V2 can be as low as 45.5dB(A) at 10ft. Quieter than generic on/off heat pumps.