XVAC Automatic Inground Pool Cleaner

$229.99

Out of stock

SKU X-VAC Categories , Tags , ,

XVAC Automatic Inground Pool Cleaner

The XVAC Automatic Inground Pool Cleaner is the first in a modern line of affordable pool cleaners. Manufactured for both its sturdy build and reliable efficiency, the XVAC works to remove sand, silt, dirt, debris, bugs, leaves, and twigs from the pool floor and steps.

Guaranteed to make your pool sparkle, this innovative cleaner comes with two random cleaning patterns that increase pool coverage in shorter cleaning cycles. Its robust design and one-piece body make it a high-performance, easy-to-use solution.

  • Automatic suction
  • Robust design with 1-piece body
  • Innovative, affordable pool cleaning
  • Open throat design for better debris removal
  • Two cleaning patterns and shorter cleaning cycles
  • Removable cover plate and hammer for easy maintenance
  • Sturdy construction
  • Optimum coverage
  • Includes 40 feet of hose

X-VAC Warranty

  • 1-Year Manufacturer Warranty

X-VAC Installation

  • Attach XVAC’s skirt by pulling it over the body and positioning it above the foot pad.
  • Connect the hose nozzle assembly, ensuring the locking nut is in position. Insert the safety valve into the skimmer with the arrow facing the water flow direction.
  • Connect the long hose pieces and the link hose to the system as described. Ensure all fittings are secure.
  • To purge air, submerge the hose and cleaner, or feed water into the hose via the return jet. Once submerged and settled, start the filtration system to initiate operation.
  • If the skirt doesn’t lie flat initially, place it in sunlight briefly or allow normal use to flatten it.

X-VAC Care and Maintenance

  • Store hoses straight—not coiled.
  • Avoid prolonged exposure to direct sunlight when out of water.
  • Clean with mild detergent; avoid harsh chemicals.
  • Maintain proper pool water chemistry.

Maintenance Tips

  • Keep baskets and filters free of debris to maximize suction and cleaner performance.
  • Inspect and replace worn skirt, foot pad, bump strip, and hammer as needed.
  • Ensure hoses are flexible, straight, and leak-free. Replace brittle or cracked hoses.

Chemical Use

Harsh chemicals may discolor the XVAC but won’t impact performance. Maintain ideal water conditions:

  • Fiberglass pools:
    • Total Alkalinity: 120–150 PPM
    • pH: 7.0–7.2
    • Chlorine: 0.5–1.0 PPM
  • Marblesheen pools:
    • Total Alkalinity: 80–120 PPM
    • pH: 7.2–7.6
    • Chlorine: 1.0–1.5 PPM

Safety Valve

Adjust the valve settings as needed to optimize cleaner movement. Ensure system suction is sufficient and leak-free. The valve body can be separated and repositioned with PVC if needed (not supplied).

Hose Weight & Movement

XVAC performance may vary by pool. Adjust hose length and safety valve settings to achieve optimal performance. Attach hose weight on the second section closest to XVAC if needed.

Troubleshooting

  • Ensure the filtration system is working properly and provides adequate suction.
  • Clear debris from the hammer chamber and ensure free hammer movement.
  • Inspect foot pad, hammer, hose connector, and locking nut for wear and blockage.

Debris

  • Clear all baskets and the cleaner of debris.

Suction

  • Backwash filters if needed and ensure strong, consistent suction.
  • Check hose connections for leaks and proper fit.

Wear and Tear

  • Replace worn skirt, foot pad, and hammer as needed.

Behavioral Issues

  • Moves short distance: Follow tips under “Does not move.” Remove hose weight.
  • Falls on side: Remove hose weight. Ensure hose connector rotates freely.
  • Gets stuck: Remove hose length or install deflector ring above connector.
  • Does not climb walls: Remove hose weight. Increase suction and backwash filter.
  • Climbs out of water: Lower safety valve setting.
  • Moves in set pattern: Adjust hose length. Do not coil hoses.

Product Warranty

1-Year Manufacturer Warranty

X-Vac pool cleaner

Parts

  • SK0001 – Footpad
  • SK0002 – Skirt
  • SK0003 – Hammer cover plate
  • SK0004 – Hammer
  • GT0005 – Main body
  • SK0006 – Bump strip
  • SK0007 – Rotation insert
  • SK0008 – Hose connector
  • SK0009 – Locking nut
  • GT0010 – Float arm
  • GT0011 – Float arm screw
  • HOSE/01 – Hose (1m)
  • SK0024 – Automatic weir valve
  • SK0032 – Weir flange adapter
  • SK0031 – Annular hose float
  • SK0022 – Hose weight
  • SK0035 – Deflector ring

DISCONTINUED – See Replacement Model:

CMP CleanPro S-2000 Suction Pool Cleaner

Additional information

Weight 10 lbs

Read more

$2,649.00

Read more

$6,499.00

Read more

Original price was: $488.00.Current price is: $450.00.

Add to cart
5.0
Based on 2 reviews
5 star
100
100%
4 star
0%
3 star
0%
2 star
0%
1 star
0%
1-2 of 2 reviews
  1. V
  2. L

    Quick and reliable service and delivery

1
    1
    Your Cart